Installing a ceiling speaker OSD audio easily!

How to install in ceiling speaker Tools Needed: * Pencil * Keyhole or Drywall saw * Phillips screwdriver * Small level * Fish tape or a coat hanger * Wire strippers * Gloves * Safety goggles * Drill * 1" Flat bit (if driving through studs ½" or ½" bit for test hole) Step 1: Decide where you want to place your speakers The speakers should be separated approximately 6 to 10 feet apart. If possible, the left and right speakers should be located the same distance from the listening position. Step 2: Make sure the place you choose for your in-ceiling speakers is between the ceiling joists (preferably centered). Tap the ceiling for a hollow sound or use a stud finder to locate the studs. Step 3: Trace around the cardboard template with a pencil for your speaker placement. Make sure the speakers are even and level. Step 4: Drill a small hole in the center outline you just traced. Step 5: Bend a piece of coat hanger wire. Insert the wire into the hole, then slowly rotate to check for any obstructions. If there are any obstructions, patch the hole and the position of the speaker. Step 6: Carefully cut the outline drawn with a keyhole or drywall saw. Then remove the trim. Step 7: Remove the cable from the speaker output on your receiver or amplifier to the speakers. Use a high quality cable at least 16 gauge speaker wire. Leave a few feet of extra cable. You can splice lengths of cable if you have a long distance to cover. Let the slack rope enough for the band...

Visit - Pioneer Elite VSX-03TXH VSX-919AH-K STR-DH500


0 comments to "Installing a ceiling speaker OSD audio easily!"

Post a Comment

Blog Archive

Labels

My Zimbio http://www.wikio.com Join My Community at MyBloglog! Audio Video Blogs - BlogCatalog Blog Directory
Web hosting for webmasters